We launched the Empower Membership Club to assure our customers that all of their heating, air conditioning and water heater needs would be met with consistency, reliability, and great savings.
As a member, you’ll enjoy a number of benefits that matter, and matter when it’s most important to you.
Competent Experts At Your Command – Empower Club Membership helps you increase system reliability, but should you need rapid service, the Empower Club Members go right to the top of our priority list (ahead of non-members).
Ongoing Energy Savings – The results of a study conducted by a University show how a service maintenance program can offer significant HVAC savings when it comes to your heating and cooling bills.
– Cleaning the condensate drain and trap
– Cleaning inside of the furnace cabinet
– Changing or cleaning furnace filter (New filter doesn’t supply)
– Checking motor windings for the accumulation of dust which may cause overheating, and cleaning as necessary
– Condition of coils and drain pans
– Safety test for carbon monoxide (CO) capable of detecting very small leaks
– Safety check for fire and explosion hazard
– Inspecting for hazardous debris
– Retrieve stored fault codes
– Checking for blockage and/or leakage in the flue pipe system.
– Compressor and motor amp draw
– Inspect disconnect switches and fuses
– Blower motor assembly, cleaning, and calibration
– Checking thermostat operation and battery level
– Measuring airflow and temperature
– Full cycle testing for the furnace
– Gas valve operation
– Checking for proper ignition, burner flame, and flame sense on burners
– Checking electrical connections for tightness and/or corrosion in the wiring system.
– Checking refrigerant pressures
– Check overall condition of the unit
– Safety test for carbon monoxide (CO)
– Safety check for fire and explosion hazard
– Inspect for hazardous debris
– Check gas piping for gas leaks
– Check the relief valve for capacity and termination
– Descaling by flushing the system with a solution
– Check electrical ground
– Retrieve stored fault codes
– Check Condensate Drain and Trap
– Check Burners and Flame Sensor
– Check collector box and drainage system
– Check hot surface igniter assembly
– Check vent pipes
– Re-calibration of the combustion chamber
Joining The Empower Membership Club Is Easy. Just Call 800-375-8984 or simply Fill Out This Form
Subscribe Now to Join Empower Membership Club
