Maintenance & Protection

Much like a car, your Heat Pump/high-efficiency furnace, air conditioner And Boiler/Tankless Water Heater require routine maintenance to protect them from the wear and tear of regular usage

Increasing the lifespan of your furnace and air conditioner by 50%

The Benefits of Preventive Maintenance Plans by Empower

  • Increasing the lifespan of by 50%
  • Saving up to 40% on energy bills
  • Unlimited No-charge service calls
  • No dispatch & diagnostics fee
  • 24/7 Live customer service support
  • Increasing your indoor air quality and comfort level
  • Improving your unit’s performance
  • Keeping your extended labor warranty valid
  • Priority service by Empower technicians 
  • Discounts on Products & Services 
 
As a member, you’ll enjoy a number of benefits that matter, and matter when it’s most important to you. 
 


Why Sign Up For a Maintenance & Protection Plan?

Yearly Maintenance helps to keep your unit running smoothly and reduces the chances of breakdown. While we can’t guarantee that your unit won’t break down we can protect you from the costs of the most unexpected repairs. The average furnace or AC repair can cost over $750. With as low as $18.99 a month we can help cover your Furnace or AC against most repair costs. 

Repair Typical Cost
Replacement of Blower Motor – Furnace$750
Replacement of Condenser Fan Motor – AC$800
Primary Heat Exchanger Replacement $1500
Furnace Water Leak$1100

Maintenance & Protection Plan Sign Up

Please enable JavaScript in your browser to complete this form.
Type of Your Property?
Are you an Empower Customer?
Name

Bronze

Maintenance Plan
  • Annual 23-step* inspection on your unit
  • Safety check for gas & carbon monoxide​
  • Post maintenance equipment health report​
  • Unlimited $0 service call dispatch fee on all HVAC equipment
  • Covers Empower installed thermostats and condensate pumps
  • 8% discount on select purchases & services
  •  
  •  

Furnace – $12.99

AC/Heat Pump – $12.99

All Seasons – $21.99

Silver

Maintenance & Protection Plan
  • Annual 23-step* inspection on your unit
  • Safety check for gas & carbon monoxide​
  • Post maintenance equipment health report​
  • Unlimited $0 service call dispatch fee on all HVAC equipment
  • Covers Empower installed thermostats and condensate pumps
  • Covers all parts & labor up to $750 on unit repairs (per year), no deductible
  • 9% discount on select purchases & services
  •  
  •  

Furnace – $18.99

AC/Heat Pump – $18.99

All Seasons – $35.99

Gold

Maintenance & Protection Plan
  • Annual 23-step* inspection on your unit
  • Safety check for gas & carbon monoxide​
  • Post maintenance equipment health report​
  • Unlimited $0 service call dispatch fee on all HVAC equipment
  • Covers Empower installed thermostats and condensate pumps
  • Covers all parts & labor up to $1,500 on unit repairs (per year), no deductible
  • 12% discount on select purchases & services
  •  
  •  

Furnace – $27.99

AC/Heat Pump – $27.99

All Seasons – $39.99

Platinum

Maintenance & Protection Plan
  • Annual 23-step* inspection on your unit
  • Safety check for gas & carbon monoxide​
  • Post maintenance equipment health report​
  • Unlimited $0 service call dispatch fee on all HVAC equipment
  • Covers Empower installed thermostats and condensate pumps
  • Covers all parts & labor with no limit on unit repairs, no deductible
  • 13% discount on select purchases & services
  •  
  •  

Furnace – $35.99

AC/Heat Pump – $35.99

All Seasons – $59.99

Alternative Systems

Maintenance Plan
  • Annual inspection on your unit
  • Safety check for gas & carbon monoxide​
  • Post maintenance equipment health report​
  • Unlimited $0 service call dispatch fee on all HVAC equipment
  • 8% discount on select purchases & services
  •  
  •  

Tankless – $12.99

Boiler – $15.99

Fireplace – $12.99

HRV – $12.99

Humidifier

Add On Maintenance Plan
  • Annual inspection on your unit
  • Filter replacement
  • Unlimited $0 service call dispatch fee on all HVAC equipment
  • 8% discount on select purchases & services
  •  
  •  

Bypass – $6.99

Steam – $28.99

All Plans Include:

.........
  • Full Equipment Maintenance
  • 24/7 Live Customer Service Support
  • No Dispatch & Diagnostics Fee
  • Unlimited No-Charge Service Calls
  • Discounts on Products & Services
  • No Contract, 180 Day Cancellation*
  •  

 

For an appliance that runs on natural gas, carbon monoxide leak is a pretty large concern for many people, which is why families keep a CO detector in the basement. During our maintenance, we use precision tools capable of detecting very small leaks that will not trigger your carbon monoxide detector. We also perform a list of other tasks during the maintenance visit, you can read about them below:


23 Steps Involved In Furnace Maintenance

  1. Check overall condition of the unit
  2. Safety test for carbon monoxide (CO)
  3. Safety check for fire and explosion hazard
  4. Inspect for hazardous debris
  5. Check gas piping for gas leaks
  6. Check furnace safety switch
  7. Cleaning inside of the furnace cabinet
  8. Check limit/rollout switches
  9. Check electrical ground
  10. Checking electrical connections for tightness and/or corrosion in the wiring system.
  11. Check polarity for 115 volts
  12. Check furnace wiring and field wiring
  13. Checking motor windings for the accumulation of dust which may cause overheating, and cleaning as necessary
  14. Retrieve stored fault codes
  15. Check Condensate Drain and Trap
  16. Check Burners and Flame Sensor
  17. Check collector box and drainage system
  18. Check hot surface igniter or pilot assembly
  19. Check thermostat operation and batteries
  20. Inspect the furnace filter
  21. Check airflow and temperature
  22. Checking for blockage and/or leakage in the flue pipe system
  23. Full cycle testing the furnace

Subscribing to our maintenance plan and becoming a member is easy. Just Call 800-375-8984 or simply Fill Out This Form


13 Steps Involved In Air Conditioner/ Heat Pump Maintenance

  1. Checking the blower motor
  2. Checking the coil, drain line and connections
  3. Checking the operating pressures and temperatures, the return and supply lines and connections.
  4. Evaluation of refrigerant levels
  5. Test for refrigerant leaks using a leak detector
  6. Lubrication of moving parts
  7. Cleaning condenser coils
  8. Inspect the furnace filter
  9. Capture any refrigerant that must be evacuated from the system, instead of illegally releasing it into the atmosphere
  10. Measure airflow through the evaporator coil
  11. Verify the correct electric control sequence and make sure that the heating system and cooling system cannot operate simultaneously
  12. Inspect electric terminals, clean and tighten connections
  13. Calibration of thermostat

Subscribing to our maintenance plan and becoming a member is easy. Just Call 800-375-8984 or simply Fill Out This Form


16 Steps Involved In Boiler/Tankless Water Heater Maintenance

  1. Check overall condition of the unit
  2. Safety test for carbon monoxide (CO)
  3. Safety check for fire and explosion hazard
  4. Inspect for hazardous debris
  5. Check gas piping for gas leaks
  6. Check the relief valve for capacity and termination.
  7. Descaling by flushing the system with a solution( not applicable to fire tube boilers)
  8. Check electrical ground
  9. Check polarity for 115 volts
  10. Retrieve stored fault codes
  11. Check condensate drain and trap
  12. Check burners and flame sensor
  13. Check collector box and drainage system
  14. Check hot surface igniter assembly
  15. Check vent pipes
  16. Recalibration of the combustion chamber

Subscribing to our maintenance plan and becoming a member is easy. Just Call 1-800-375-8984 or simply Fill Out This Form


6 Steps Involved In HRV System Maintenance

  1. Inspect the air filters
  2. Check HRV outdoor intake and exhaust hoods
  3. Inspect the condensate drain
  4. Clean the heat exchange core
  5. Inspect ductwork
  6. Service & clean the fans

Subscribing to our maintenance plan and becoming a member is easy. Just Call 800-375-8984 or simply Fill Out This Form


8 Steps Involved In Gas Fireplace Maintenance

  1. Turn the gas valve off
  2. Disassemble the gas fireplace
  3. Brush the unit & inspect the parts
  4. Inspect & clean the firebox
  5. Reassemble the Fireplace 
  6. Inspect any exterior Vents
  7. Check carbon monoxide detector
  8. Check burner ignition

 

*If you cancel this Agreement in the first six months, you will be charged for the regular cost of services you received minus the total amount you have already paid. 

Fill This Out For a Free Estimate

Please enable JavaScript in your browser to complete this form.